Tapered Button Bit & Rod
Tapered Button Bits
Taper bits, especially Tapered button bits are the most popular tapered drill bits with a wide selection of head diameters from 26mm to 48mm. With carbide buttons pressed on the bit skirts, tapered button bits have a good drilling performance and are excellent in longevity.
Taper drill bits are connected to taper drill rods for drilling duties, suitable for tunneling, construction, mining, quarrying, etc.
Bit diameter: 26mm to 60mm;
Tapered degree: 4°46’, 6°, 7°, 11°, 12°;
Shank sizes: Hex. 19mm, Hex, 22mm and Hex. 25mm;
Carbide type: Chisel type, Cross type, Button type.
Skirt is zinc coated to promote friction between drill bit and drill rod, thus to achieve better efficiency;
Alloy buttons are mounted into the drill bit, ensuring the bit good accuracy and durability;
Reliability ensured by premium drill bit materials and premium alloy button;
Different types designed for different drilling scenarios and rock conditions;
Cost-effective, with competitive and reasonable price, our products offer 82%-92% lifespan of their famous branded counterparts.
Taper Chisel Bits
Taper Degree: 4°46', 6°, 7°
Taper Cross Bits
Taper Degree: 4°46', 6°, 7°, 11°, 12°
4° 46' Taper Button Bits
Taper Degree: 4°46'
11° Taper Button Bits
Taper Degree: 11°
7° Taper Button Bits
Taper Degree: 7°
12° Taper Button Bits
Taper Degree: 12°
Tapered Drill Rods
Tapered drill rod is a further development of the integral drill rods. It usually has a forged collar to maintain the proper shank striking face position in the rock drill.
With one side connected to rock drill and the other side connected with taper drill bit, the taper drill rod transmits power from rock drill to bit, drilling work is thus performed. Tapered drill rod is a further development of the integral drill rods. It usually has a forged collar to maintain the proper shank striking face position in the rock drill. Tapered drill rod effective lengths are measured from the collar to the bit end, which are usually from 0.6meter to 3.6 meters.
Drilling duties in tunneling, construction, mining, quarrying, etc.
The relationship Between Taper angle and taper end diameter
Shank sizes: Hex.19mm, Hex. 22mm, Hex.25mm
Taper degrees: 4°46’, 6°, 7°, 11°, 12°.
Length: 400 - 8000mm.
Carburizing process is applied to promote surface hardness, thus grant better wearing quality and lifespan for the drill rods;
23CrNi3Mo, which is in same league as Sandvik Sandbar 64, is applied as drill rod material.
Cost-effective, good performance with reasonable price.
Complete types of drill rod for various drilling scenarios.